Our tecnolgy rotation

Hi bloggers. For three weeks we had a class rotation. It was based on technology. So every class had to start of with there own class. So in my class we did something thats called a Geo board.  We had to saw a piece of wood and measure it and it had to be 12 cm on the side and we to measure 12 cm of where we wood cut it then we had to get some nails and hammer it into our wooden piece of would the hammers were't enough for everybody. So we used big sticks at first I thought it might not work but it did and I was surprised. we had to only nail in 25 nails in the board but before that we had to get a pencil and mark it before we nailed in 25 nails.

Here is the one I made in class


          In the second week of us doing our technology class and the next class was Waitemata   we had to make a design with some pieces of string and some pieces of ice block sticks and a plastic cup and we were not allowed to break the ice block sticks because so the other class that was going to come could use them.  We had about 45 minutes to finish we did not come first but we did finish.






In the 3rd class we had to get any metal pieces and make a led light work for a long time . I had the longest piece in the class and there was a batterie that with the led light we had to put the long piece in the bottom and the short piece in the top. At the end we had to put all the pieces away and put them in the right place and we had to give the batterie back and the led light back.

We learned to never give up not go into frustration and we learned how to preserver all together.
So next time when we do something similar to the I will remember these rules.
Why we have to follow these rules is that when we get really frustrated and we lose hope we can remember this and stand tall again.